본문 바로가기

Flashlight/Review

Zebralight H602w XM-L2 Neutral White Headlamp

작성일: 2017.11.27

-------------------------------------------------------------

제브라라이트의 H602w XM-L2 라이트입니다.


먼저 제조사 스펙입니다.


LED: Cree XM-L2 Neutral White (Norminal CCT 4400K)

User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High: H1 1020 Lm (PID, approx 2 hr) or H2 620 Lm (PID, approx 2.5 hrs) / 330 Lm (3.9 hrs)
Medium: M1 65 Lm (30 hrs) or M2 30Lm (66 hrs) /11 Lm (172 hrs)
Low: L1 3.5 Lm (16 days) or L2 0.4 Lm (2.5 months) / 0.06 Lm (4.6 months) / 0.01 Lm (5.5 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
 
Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using ZL631 batteries. Runtimes of the two PID controlled levels (1020Lm and 620Lm) vary greatly with ambient temperature and air ciculation.
Operating Voltage Range: 2.7V - 4.2V
Battery: One 18650 size 3.6/3.7V li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
 120 degree flood
Dimensions
 Head Diameter: 0.95 inch (24.2 mm)
 Length: 3.82 inch (97 mm)
Weight
 1.5 oz (43 gram)

PID thermal regulated outputs (1020Lm and 620Lm)

Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
Builtin over-discharging protection (2.7V cutoff)
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Precision machined unibody casing from premium grade aluminum bar stocks
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Durable natural hard anodized finish (Type III Class I)
Tempered optical grade glass
Waterproof to IPX8 (2 meters, 30 minutes)


Operations(UI)

 This light has 3 main levels (High, Medium, and Low) and a beacon-strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.


Basic Operation
 One short-click turns on the light to High or turns off the light.
 Two short-click turns on the light to Medium.
 Three short-click turns on the light to the beacon-strobe mode.
 Press and hold (for over 0.6 seconds) turns on the light to Low and then Medium and High. Release at the desired level.


Advanced Operation and Configuration
 Press and hold to cycle from Low, Medium and High, release at the desired level to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
 Double click to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorized after the light is turned off and through battery changes.
 The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. Short click to turn off the light when finishing configurations. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.
 This light uses the main LED (flashing 1 to 4 times) to indicate the estimated remaining capacity of the battery. To start the battery indicator, (from Off) short-click 4 times without pause.
 Beacon-strobe mode can be accessed from 3 short-clicks when the light is Off. Once in the beacon-strobe mode, you can double-click to cycle through different types of beacons and strobes. Beacon-strobe settings are memorized when the light is turned off and through battery changes.
 
Accessories in the package

 Two o-rings
 Headband with removable top strap, and a black silicone holder


포장


구성품들


쥐색 아노다이징






헤드쪽에 있는 작지만 여러개의 방열핀


전면 유리에는 AR코팅은 안되어 있습니다.


H602의 특징인 반사경이 없는 구조입니다.

가운데 LED가 있으며, 빛을 모아서 멀리 보내주는 역할을 하는 반사경이 없습니다.

즉, 근거리에서 확산형 빛을 원할 때 고르는 제품이죠.

LED주위는 야광처리가 되어 있어서, 라이트 사용 후에 빛이 모아지면 녹색빛이 납니다.


아래처럼요.


전자식 스위치입니다.

H600w, H600Fw 등과 달리 스위치가 전면 유리쪽으로 치우쳐 있습니다.

이는 반사경이 없는 구조이기도 하고, 제브라라이트 제품들은 LED와 mcpcb가 함께 납땜되어 있는 구조라서 반사경이 없어지면서

기판이 앞으로 이동했기 때문에 생긴 차이입니다.


테일캡


기본 2단 분리


테일캡 내부


나사선과 오링


몸체 안쪽 헤드쪽도 스프링이 부착되어 있습니다.





빔샷입니다.

실내빔샷 (거리 약 50cm)

H1


H2 (620lm)


M1


M2 (30lm)


L1 (확산형 빔샷이라서 거의 보이지 않게 찍혔네요)


그래서 가까이 찍어봤습니다.


실외빔샷 (거리 약 5m)

H1


H2 (620lm)


Medium 모드 이하는 빔샷으로 나오지 않아서 제외했습니다. (물론 노출 시간을 더 주면 나오기는 합니다.)


이 제품은 확산형 빔샷 특성상 호불호가 갈릴 수 있으며, 근거리에서 사용하기에는 상당히 좋습니다만 거리가 조금만 멀어지게 되면

라이트 기능으로서 빛을 비춰주는 기능을 제대로 발휘하기 어렵습니다. 구입하실 분들은 참고하시구요.


반사경이 없지만, LED 자체의 직진성 때문에 아래 사진처럼 완전히 고른 빔샷이 아니라 가운데 XM-L2 LED Chip 모양이 살짝 드러납니다.