Zebralight H600w MK2 Neutral White Headlamp

작성일: 2017.11.11

-------------------------------------------------

제브라라이트 헤드랜턴 시리즈 중 하나인 H600w MK2입니다.

우선 제조사 사양입니다.

LED: Cree XM-L2 Neutral White (Nominal CCT 4400K)

User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.

Light Output (runtimes)

High:         H1 1020 Lm (PID, approx 2 hr)   or    H2  620 Lm (PID, approx 2.5 hrs) / 330 Lm (3.9 hrs) / 150 Lm (11 hrs)

Medium:    M1 65 Lm (30 hrs)    or    M2   30 Lm (66 hrs) / 11 Lm (172 hrs)

Low:         L1   3.5 Lm (16 days)   or    L2   0.4 Lm (2.5 months) / 0.06 Lm (4.6 months) / 0.01 Lm (5.5 months)

Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1

 

Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using ZL634 batteries. Runtimes of the two PID controlled levels (1020Lm and 620Lm) vary greatly with ambient temperature and air circulation.

Operating Voltage Range: 2.7V - 4.2V

Battery: One 18650 size (up to 69mm long) 3.6/3.7V li-ion rechargeable. Batteries are not included in the package.

Parasitic Drain: Negligible (much less than the self discharging of a battery)

Beam Type

 80 degree spill

 12 degree hot spot

Dimensions

 Head Diameter: 0.95 inch (24.2 mm)

 Length:    3.85 inch (97.8 mm)

Weight

 1.4 oz (39 gram) 

 3.0 oz (84.6 gram) with ZL634 battery

 4.4 oz (124.6 gram) with ZL634 battery and headband

Features

 PID thermal regulated outputs (1090Lm and 660Lm)

 Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)

 Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low

 Builtin over-discharging protection (2.7V cutoff)

 Durable electronic soft-touch switch

 Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.

 Precision machined unibody casing from premium grade  aluminum bar stocks

 Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing

 Durable natural hard anodized finish (Type III Class I)

 Sealed and potted LED driver circuitry

 Battery reverse polarity protection

 Tempered optical grade glass 

 Orange peel textured reflector

 Waterproof to IPX7 (2 meters, 30 minutes)

Operations (작동법, UI)

This light has 3 main levels (High, Medium, and Low) and a beacon-strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.

Basic Operation

 One short-click turns on the light to High or turns off the light.

 Two short-click turns on the light to Medium.

 Three short-click turns on the light to the beacon-strobe mode.

 Press and hold (for over 0.6 seconds) turns on the light to Low and then Medium and High. Release at the desired level.

Advanced Operation and Configuration

 Press and hold to cycle from Low, Medium and High, release at the desired level to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.

 Double click to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorized after the light is turned off and through battery changes.

 The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. Short click to turn off the light when finishing configurations. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.

 This light uses the main LED (flashing 1 to 4 times) to indicate the estimated remaining capacity of the battery. To start the battery indicator, (from Off) short-click 4 times without pause.

 Beacon-strobe mode can be accessed from 3 short-clicks when the light is Off. Once in the beacon-strobe mode, you can double-click to cycle through different types of beacons and strobes. Beacon-strobe settings are memorized when the light is turned off and through battery changes.

 

Accessories in the package

 Two o-rings

 Headband with removable top strap, and a black silicone holder

종이박스 상자입니다.

구성품들

헤드랜턴이라서 헤드밴드가 추가로 포함되어 있습니다.

여분 오링 2개

헤드밴드

18650 배터리를 사용하는 라이트라서 제품 자체의 무게는 아주 가벼운편이나, 배터리 무게까지 포함되면 거의 100g에 가깝게되어

실사용 시 라이트가 앞으로 쏠릴 수 있어, 정수리를 가로지르는 밴드가 기본적으로 장착되어 있습니다.

헬멧에 장착할 때도 유용하구요.

고무로 라이트를 고정하는 방식아며, 상당히 타이트하게 장착되어 라이트가 빠질 우려는 안해도 될 것으로 생각됩니다.

본체

헤드밴드 고정을 위해 몸체에 곡선홈이 아닌 직성형 홈이 2개 있습니다. 헤드쪽과 몸체 가운데에 있죠.

확대사진

테일캡

헤드쪽 홈은 발열을 위한 것입니다.

테일캡 바닥면

AR코팅은 안되어 있네요.

OP반사경이고, LED는 가운데 잘 자리잡고 있습니다.

전자식 스위치

스위치는 돌출되지 않은 형태입니다.

스프링이 장착된 테일캡

나사선은 상당히 잘 가공되어 있습니다.

헤드쪽에도 스프링이 있는 구조입니다.

헤드랜턴이지만, 가볍고 ㄱ자형 손전등으로 활용할 수 있는 점이 좋습니다.

다만, 클립이 없다는 점은 아쉬운 부분이구요. 경쟁 제품이라고 볼 수 있는 Olight H2R이나, Armytek Wizard 제품의 경우 클립이 별도로

제공되는 점을 감안하면 더욱 아쉬운 대목입니다.

빔샷입니다.

실내빔샷 

H1

H2 (620lm)

M1

M2 (30lm)

L1

실외빔샷 

H1

H2 (620lm)

M1

M2 (30lm)