본문 바로가기

Flashlight/Review

EAGTAC PX30LC2-DR Nichia219C version simple review

작성일: 2018.06.12

--------------------------------

중고로 구입한 이글택의 PX30LC2-DR Nichia219C 버전입니다.

Eagletac 이라는 이름에서 EAGTAC이라고 축약해서 나오고 있는데, 이유는 모르겠습니다.


아래는 구성품들입니다. 중고로 구입했기 때문에 뭔가 빠졌어도 모르겠습니다만, 확실하 매뉴얼은 없는 것 같습니다.



워런티 기간이 10년이네요.


아래는 홈페이지에 있는 사양입니다.

Dimensions

Head Dia.
1 inches (25.6 mm)
Body Dia.
0.85 inches (22 mm)
Length:
5.2 inches (132 mm)
Weight
2.1 ounces (60 grams)
w/o battery
3.9 ounces (110 grams)
w/ battery

Battery Type

  • 1x18650 or 2xCR123A2
  • The built-in li-ion rechargeable function only works with a single 18650 battery
  • Compatible battery (diameter/length)
    • 123A: (16-16.8mm/34-34.5mm)
    • 18650: (18-18.8mm/67-68.5mm)
  • Read precaution with li-ion batteries.

Operating voltage

  • 2.7V - 6V
  • All batteries are connected in series. Do not exceed 6V. Do not use two rechargeable 3.0/3.7V RCR123A.

What's included

  • PX30LC2-DR flashlight
  • Diffuser head built-in with spot output glare shield
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • CR123A Battery Magazine
  • USB charging cable (3.3feet/1meter)
    w/ AWG24 copper wire
  • EAGTAC 18650 Li-ion battery included
  • Smooth stainless steel bezel
  • EAGTAC li-ion 18650 2600mAh battery (authentic Sanyo Japan cell)
  • Removeable darken pocket clip made of spring steel w/ harden treatment
  • UL certified USB 5V 1A wall charger (100V-240V)
  • Heavy duty nylon holster

Carrying method

  • Para-cord lanyard with quick attachment clip
  • Heavy duty nylon holster

Waterproof

  • IPX-8 standard

Replaceable items

  • Lens

Reflector

  • Smooth aluminum reflector

Material

  • HAIII hard anodization aerospace aluminum

LED

  • CREE XP-L HI V3 LED + Flood LED Array (Cool White) LED
  • CREE XP-L HI V2 LED + Flood LED Array (Neutral White) LED
  • Nichia 219C 4000K CRI92 R9050 D240 LED + Flood LED Array (Neutral White) LED

Max output

  • CREE XP-L HI V3 Cool White LED
    • LED lumen: 1160
    • ANSI FL-14 lumen: 930
  • CREE XP-L HI V2 Neutral White LED
    • LED lumen: 1080
    • ANSI FL-14 lumen: 845
  • Nichia 219C 4000K CRI92 R9050 D240 Neutral White LED
    • LED lumen: 800
    • ANSI FL-14 lumen: 640
  • 3014 LED array
    • LED lumen: 600 (Cool White)
    • LED lumen: 550 (Neutral White)

Beam Profile

CREE XP-L HI V3 Cool White LED - SPOT 

  • Center lux: 17,500 lux
  • Center spot angle: x°
  • Spill light angle: x°
  • Beam distance: 288 yards / 265 meters
Nichia 219C 4000K CRI92 R9050 D240 Neutral White LED - SPOT 

  • Center lux: 9,100 lux
  • Center spot angle: x°
  • Spill light angle: x°
  • Beam distance: 208 yards / 191 meters
3014 LED array 

  • Spill light angle: 180°

Lens - Spot/Flood

  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)
  • Multi-layers low color distortation A.R. coating on both side (98% transparency) to prevent reflections and color shadow over wider wavelength - Nichia 219 CRI92 only

LED circuit

  • C3200L DIFF3 SC
    • Highly integrated design w/ built-in side click switch
    • Smart battery level report system
    • Ultra low dropout voltage (< 0.25v) for longer current regulated runtime using single 18650 battery
    • Dual LED output design with three output groups
    • High switching frequency (1MHz) controller for more compact circuitry design
    • Low internal resistance design offers up to 99% efficiency7
    • Non-dimming constant current regulation for all output levels without flicking
    • Dual LED output design
    • Zero standby current
    • Energy saving feature5

Charging circuit

  • L950 SC
    • 5V USB input (requires 1A or higher)
    • 950mA MAX charging current
    • Constant current / Constant voltage charging logarithm
    • Small current charging for low voltage battery (less than 3.0V)
    • Precise voltage detection design +/- 1%
    • No trickle charge
    • Smart charging level report system

Battery level report (discharging)

  • A blue LED indicator under the main switch reports the estimated battery remaining capacity
    • Flash once: lower than 20%
    • Flash twice: 20%-50%
    • Flash 3 times: 50%-80%
    • Flash 4 times: higher than 80%

Charging level report (charging)

  • A blue LED indicator under the main switch reports current charging level
    • Flash once: lower than 50%
    • Flash twice: 50%-75%
    • Flash 3 times: >75%
    • Constant on: 100% (done)

Output and Runtime

  • Four brightness levels (SPOT only)
    • Led lumen:
      11605-980/590/221/77/9
    • ANSI FL-1 lumen: 9305-795/477/179/63/7
    • Runtime:
    • 1.5/2.8/8.5/28/200+ hours (1x18650)6 
      0.8/1.5/5/17/140 hours (2xCR123A)
  • Four brightness levels (Flood only)
    • Led lumen: 600/290/140/40/3
    • Runtime:
    • 3.3/7.5/19/45/200+ hours (1x18650)6 
      1.7/4/12/30/140 hours (2xCR123A)
  • Four brightness levels (SPOT + Flood)
    • Spot Led lumen: 720/295/61/3
    • Diffuser Led lumen: 350/170/80/20/2
    • Runtime:
    • 1.8/4.5/12/35/200+ hours (1x18650)6 
      1/2.5/6.5/22/140 hours (2xCR123A)

Operations

Basic operations:

  • Turn on the light at MAX output by pressing the tailcap button until it clicks.
  • Turn on the light at LOW output by holding the side switch button while pressing the tailcap button until it clicks.
  • For momentary on function, slightly press the tailcap button
  • To switch between different brightness levels, press the side button switch w/ flashlight on
  • To enter hidden auxiliary mode, press and hold the side button switch for 3 seconds w/ flashlight on



Toggle SPOT and FLOOD output:

  • Press and hold the side switch for more than one second to switch between spot LED, flood LED, or both on.



Battery charging:

  • Remove the waterproof cover and insert the charging cable to charge the battery. User must turn on the flashlight switch at the tailcap to charge. 
    (The flashlight will switch off the LED output during charge automatically until the charging cable is disconnected.)
  • The indicator may start flashing when user plug in the charging cable (without turning on the tailacp switch). Switch on the tailcap switch to start charging and the charging indicator will reflect the current charging level.

Changing

Controls

Other features

  • Diffuser head built-in with spot output glare shield
  • LED direct soldering on copper for maximum heatsink ability (Spot LED only)
  • User replaceable glass lens
  • Battery reverse polarity protection
  • Ultra low internal resistance phosphor bronze springs (silver coated)
  • Spring loaded positive and negative terminal
  • Bi-directional pocket clip design
  • Built-in li-ion charger

Warranty

EAGTAC 홈페이지에 있는 자료를 가져온 것인데요, 타 브랜드 대비 정말 상세한 사양을 표기하고 있습니다.

LED선택권도 워낙 다양합니다.

이 제품은 Nichia219C LED를 채용한 제품이며, 4000K 정도의 뉴트럴화이트이고, CRI 92의 고연색성을 나타내는 LED입니다.

기타 사양은 위에 가져온 사양을 참고하시구요.


구성품 중 하나인 CR123 배터리 홀더입니다.




기본 포함된 18650 배터리로 인해서 라이트 몸체 직경이 넓어 CR123 배터리를 넣으면 움직이기 때문에, 그걸 방지하기 위한 홀더입니다.


오링 2개

예전부터 EAGTAC 제품을 몇개 구입해서 보면 오링이 너무 얇은거 아닌가 하는 생각이 많으 들었는데 PX30도 동일하네요.


랜야드


PX30LC2-DR의 이름에서 D는 Diffuser, R는 Rechargeable입니다.

그래서 기본 포함되어 있는 충전케이블입니다. USB타입이라서 손쉽게 충전할 수 있습니다.


기본 포함된 배터리


횸페이지 정보에 따르면 2600mAh와 3500mAh 중에서 선택할 수 있는 것 같은데, 제가 구입한 것은 2600mAh 입니다.


홀스터






본체입니다.





로고


LC2는 2cell 라이트라는 의미로 알고 있습니다.


헤드쪽 모습입니다.


아래는 제품명 각인이구요.


독수리 로고가 양각된 고무커버 부분이 사이드 스위치입니다.


그 아래 부분에 DC 5V라고 적힌 부분이 충전구멍입니다. 동봉된 충전케이블을 꽂으면 되죠.


아래처럼 구멍이 있습니다.

일단 제조사 표기 사양으로는 IPX8 방수 사양입니다.


제가 구입한 이유는 헤드 측면부 Diffuser LED 라이트입니다.

3014 LED가 장착되었고, 출력은 5W급이며 루멘은 550 LED 루멘입니다. (뉴트럴 화이트 기준이며, 쿨화이트는 600루멘)


3014 LED는 아래처럼 생긴 Chip입니다.

(출처: www.alibaba.com/)


사이드 스위치 뒷 부분에는 배터리 규격, 충전 규격 등이 표기되어 있습니다.


클립



테일캡 스위치의 고무캡에는 독수리 로고가 새겨져 있습니다.


랜야드 연결용 플라스틱 부품




3단 분리


나사선은 깊지 않고, 오링도 얇은 편입니다.



스프링, 사양에는 황동재질에 은을 코팅했다고 하는군요.


소형 18650 라이트라서 몸체 두께도 얇은편입니다.


헤드쪽 모습


일종의 역전압 방지장치로 하얀색 플라스틱이 둘러싸고 있는 형태입니다.


특이한 녹색빛 AR코팅입니다.


LED는 일본 니치아의 NVSL219C 입니다.

반사경은 매끈한 미러타입으로 직진성을 높였습니다.


충전



헤드 쪽에 충전포트가 있고, 사이드 스위치가 있어서 살짝 긴편입니다.


사이드 스위치로 작동할 때


랜야드는 다소 짧은편입니다.



그래서 손목에 랜야드를 끼우고 라이트를 쥐면, 라이트를 많이 움직일 수는 없네요.

물론 길이가 길다고 좋은 것도 아니라서, 사용하는 습관에 따라 선호가 갈릴 것 같습니다.



빔샷에 앞서 UI는 대략 아래와 같습니다.

테일캡 스위치로 라이트 ON/OFF만 할 수 있음.

사이드 스위치로 밝기 조절 및 LED 발광 방식 (Spot, Floody, Spot+Floody)을 조절할 수 있습니다.

테일캡 스위치로 점등하면 무조건  최고 밝기로 점등됩니다. Low밝기로 켜고 싶다면, 사이드 스위치를 누른 상태에서 테일캡 스위치를 누르면

Low 모드로 켜집니다.


개인적으로 아쉬운 부분은 테일캡 스위치로 점등할 때는 무조건 최고 밝기로만 켤 수 있다는 점인데요. 사이드 스위치와 테일캡 스위치를

동시에 사용해서 작동하면 Low모드로 켜지기는 하지만, 한손 조작이 안되는 점이 있습니다. UI를 개선해서 테일캡 스위치로 점등 시에

Max 또는 Low 밝기로 켤 수 있도록 하면 좋을 것 같네요.


LED 발광 방식은 우선 LED가 반사경 가운데 있는 Main LED와 헤드 주변으로 Diffuser LED가 위치하고 있습니다.

사이드 스위츠를 누르면 Main LED만 점등하거나, Diffuser LED만 점등하거나, Main & Diffuser LED 모두 점등하는 것을 선택할 수 있습니다.


아래부터 빔샷입니다.

Main Very Low


Main Low


Main Med


Main High


Main Max


Diffuser LED 점등 시


Diffuser Very Low


Diffuser Low


Diffuser Med


Diffuser High


Diffuser Max


다음은 Main+Diffuser 모두 점등한 사진입니다.


Main+Diffuser Very Low


Main+Diffuser Low


Main+Diffuser Med


Main+Diffuser High


Main+Diffuser Max


실외빔샷

Main Very Low


Main Low


Main Med


Main High


Main Max


Main Max



아래 사진은 Diffuser LED만 점등했을 때 모습입니다.

Main LED가 점등되지 않았기 때문에 가운데 부분에 검은 부분이 있구요. 근거리 확인용 혹은 캠핑 시 무드등으로도 괜찮을 것 같습니다.


Main LED만 켰을 때


Main+Diffuser LED 동시 점등 시

Main LED만 켰을 때에 비해서 보다 주변관이 있는 것을 알 수 있습니다.


아래는 PX30LC2-DR 매뉴얼입니다.

px30lc2dr.pdf