본문 바로가기

Flashlight/Review

Zebralight SC62w XM-L2 review

작성일: 2017.11.27

----------------------------------------------------------

제브라라이트의 SC62w 입니다.


먼저 제조사 사양입니다.


LED: Cree XM-L2 Cool White (Nominal CCT 6300K)
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High:         H1 930 Lm (PID, approx 2 hr)   or    H2  577 Lm (PID, approx 2.5 hrs) / 326 Lm (3.9 hrs) / 149 Lm (11 hrs)
Medium:    M1 65 Lm (30 hrs)    or    M2   30 Lm (66 hrs) / 11 Lm (172 hrs)
Low:         L1   3.4 Lm (16 days)   or    L2   0.4 Lm (2.5 months) / 0.06 Lm (4.6 months) / 0.01 Lm (5.5 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
 
Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using ZL634 batteries.
Operating Voltage Range: 2.7V - 4.2V
Battery: One 18650 size (up to 69mm long) 3.6/3.7V li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
 80 degree spill
 12 degree hot spot
Dimensions
 Head Diameter: 0.96 inch (24.4 mm)
 Length:    3.8 inch (96.5 mm)
Weight
 1.4 oz (40 gram)


Features
 PID thermal regulated outputs (1000 and 620 Lm)
 Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
 Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
 Builtin over-discharging protection (2.7V cutoff)
 Durable electronic soft-touch switch
 Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
 Precision machined unibody casing from premium grade  aluminum bar stocks
 Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
 Durable natural hard anodized finish (Type III Class I)
 Sealed and potted LED driver circuitry
 Battery reverse polarity protection
 Tempered optical grade glass  
 Orange peel textured reflector
 Waterproof to IPX7 (2 meters, 30 minutes)


Operations(UI)

This light has 3 main levels (High, Medium, and Low) and a beacon-strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.


Basic Operation
 One short-click turns on the light to High or turns off the light.
 Two short-click turns on the light to Medium.
 Three short-click turns on the light to the beacon-strobe mode.
 Press and hold (for over 0.6 seconds) turns on the light to Low and then Medium and High. Release at the desired level.


Advanced Operation and Configuration
 Press and hold to cycle from Low, Medium and High, release at the desired level to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
 Double click to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorized after the light is turned off and through battery changes.
 The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. Short click to turn off the light when finishing configurations. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.
 This light uses the main LED (flashing 1 to 4 times) to indicate the estimated remaining capacity of the battery. To start the battery indicator, (from Off) short-click 4 times without pause.
 Beacon-strobe mode can be accessed from 3 short-clicks when the light is Off. Once in the beacon-strobe mode, you can double-click to cycle through different types of beacons and strobes. Beacon-strobe settings are memorized when the light is turned off and through battery changes.
 
Accessories in the package

Two o-rings


악세사리가 오링 2개라고 표기된 이유는 클립이 본체가 기본 부착되어 있어서 그런 것 같습니다.


포장은 종이박스이구요


구성품


쥐색 아노다이징이구요.


기본 부착된 스테인레스 재질의 클립

나사는 십자 나사입니다.


각인은 단촐하게 Zebralight SC62w가 전부입니다.


확대


전면 유리 AR코팅 확실하구요


XM-L2 Neutral white이며, OP반사경입니다.


빔샷입니다. 


실내빔샷(거리 약 50cm)


H1


H2 (577lm)


M1


M2 (30lm)


L1


실외빔샷 (거리 약 5m)

H1


H2 (577lm)


M1


M2 (30lm)


SC62 시리즈는 SC600 시리즈의 경량화 모델로 보면 됩니다.

광량은 다소 낮지만, 대신 무게는 더 가볍죠. (SC600 78g vs. SC62 40g, 배터리 제외)

H1, H2 모드는 연속 구동은 어렵습니다. 열이 너무 많이 발생하기 때문이죠. 잠깐 잠깐 고광량이 필요할 때 사용하는 용도입니다.

18650 배터리를 포함하더라도 무게가 100g이 안되기 때문에, 제가 생각할 때 EDC용으로는 최적인 제품이라고 생각됩니다.