본문 바로가기

Flashlight/Review

Zebralight SC62 Used simple reivew

SC62d 리뷰 참고 (리뷰 링크 클릭)

-----------------------------------------------------------------------------------------------------------------


제브라라이트 SC62 입니다.

SC62, SC62w, SC62d 각 3개의 SC62 제품이 있으며, 각각 XM-L2 쿨화이트, XM-L2 뉴트럴화이트, Luxeon T Hi CRI LED를 장착하였으며

SC62, SC62w는 XM-L2 LED를 장착해서 상당한 고광량이지만, SC62d는 최고광량 320루멘입니다.


제조사 스펙

- LED: Cree XM-L2 Cool White (Nominal CCT 6300K)

- User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level   of the each main levels can be further programmed to different brightness levels.

- Light Output (runtimes)

  High:         H1 1000 Lm (PID, approx 2 hr)   or    H2  620 Lm (PID, approx 2.5 hrs) / 350 Lm (3.9 hrs) /160 Lm (11 hrs)

  Medium:    M1 70 Lm (30 hrs)    or    M2   32 Lm (66 hrs) / 12 Lm (172 hrs)

  Low:         L1   3.7 Lm (16 days)   or    L2   0.4 Lm (2.5 months) / 0.06 Lm (4.6 months) / 0.01 Lm (5.5 months)

  Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1

  Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using ZL634 batteries.

- Operating Voltage Range: 2.7V - 4.2V

- Battery: One 18650 size (up to 69mm long) 3.6/3.7V li-ion rechargeable. Batteries are not included in the package.

- Parasitic Drain: Negligible (much less than the self discharging of a battery)

- Beam Type

  80 degree spill

  12 degree hot spot

- Dimensions

  Head Diameter: 0.96 inch (24.4 mm)

  Length: 3.8 inch (96.5 mm)

 Weight: 1.4 oz (40 gram) 

- Features

  PID thermal regulated outputs (1000 and 620 Lm)

  Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)

  Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low

  Builtin over-discharging protection (2.7V cutoff)

  Durable electronic soft-touch switch

  Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.

  Precision machined unibody casing from premium grade  aluminum bar stocks

  Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing

  Durable natural hard anodized finish (Type III Class I)

  Sealed and potted LED driver circuitry

  Battery reverse polarity protection

  Tempered optical grade glass

  Orange peel textured reflector

  Waterproof to IPX7 (2 meters, 30 minutes) 


상자는 다른 제브라라이트답게 소형 종이박스 상자에 담겨 있습니다.

윗면에는 다른 브랜드에서 보이는 브랜드명 혹은 모델명이 없는게 특징입니다. (원가절감인지...)


제품에 대한 정보는 옆면에 간략히 나와있습니다.

회사는 미국, 제조는 중국입니다.


정말 간단한 포장입니다.

절반은 라이트이고 절반은 악세사리이고, 원래라면 종이 매뉴얼이 있었을 겁니다. (중고로 구입한거라 판매자가 매뉴얼은 버린 듯하네요.)


홀스터는 없으며, 오링만 두개 있습니다. 클립은 본체에 부착되어 있구요.


쥐색 마감입니다.

바디의 각인면에는 브랜드와 제품명만 간단하게 새겨져 있습니다.



스위치

주위보다 낮아서 실수로 눌리는 일이 없도록 설계되었으며, 전자식 스위치입니다. 딸깍거리는 소리가 납니다.

스위치를 만드는 회사가 다른것인지는 모르겠지만, 제브라라이트 제품 구매하면서 동일한 느낌의 스위치는 없더군요. 

어떤 제품은 심하게 딸깍거리고, 어떤 제품은 적당하고.


테일캡은 평평해서 꼬리세움하는데 문제 없습니다.


헤드쪽은 발열을 위해서 촘촘한 핀이 있고, 몸체에는 그립감을 높이기 위해서 물결 모양으로 디자인되어 있습니다.



클립은 라이트에 기본 부착되어 있습니다.



헤드 유리에는 코팅이 되어 있구요.

제가 갖고 있는 SC62d는 코팅이 없는데, SC62에는 있네요. ㅎ


OP반사경입니다. XM-L2가 가운데 잘 자리잡고 있네요.


기본적으로 테일캡만 분리가능합니다.

헤드는 분리가 어렵도록 베젤에 홈도 없으니까요.


오링과 나사선


초소형 18650 라이트답게 크기도 상당히 작습니다.

무게도 상당히 가벼워서 18650 배터리보다 가벼운 40g 입니다! (18650 배터리가 보통 45g 정도인 것을 감안하면 상당히 가볍습니다.)

40g의 무게로 1000루멘을 감당한다는게 신기할 따름입니다.


빔샷은 모드가 워낙 다양해서 H1(1000루멘), H2(620루멘) 만 찍었습니다.

상세 사양은 홈페이지 참고(링크)


실내빔샷(거리 약 50cm, ISO 100, 태양광, 1/250s)

1000루멘


620루멘


실외빔샷(거리 약 50cm, ISO 100, 태양광, 1s)

1000루멘


620루멘


1000루멘 실외빔샷


참고 런타임 자료입니다.

(자료 출처: http://www.candlepowerforums.com/vb/showthread.php?392898-Zebralight-SC62-(XM-L2-1x18650)-review-RUNTIMES-BEAMSHOTS-VIDEO-and-more!)


열을 식힐 때와 그렇지 않을 때의 그래프


매우 작은 라이트인 점을 감안할 때 상당히 우수한 발광 성능을 보여줍니다.

열을 식히지 않았을 때에도 약 600루멘 수준에서 3시간 정도의 런타임을 보여주니까요.


2016-02-21 추가

Zebralight 홈페이지에서 자사 PID에 대한 기능 설명이 추가되었습니다.


Programmable PID thermal regulation temperature target value (existed in all lights with the PID thermal regulation feature since late 2012)


2012년 이후 모델에 적용된 PID 기능을 사용자가 프로그램할 수 있다고 하네요.


방법은 아래와 같습니다. 


- PID Thermal Regulation Temperature Programming for two highest output levels:

  Turn off the light from H1 and then turn back on to H1

  Press and hold to cycle from Low to High 6 times

  On the 7th (or more) cycle, release the switch

    when High to add 1 degree C (up to 5 max)

    when Med to revert back to the factory default

    when Low to subtract 1 degree C (up to 5 max)