본문 바로가기

Flashlight/Review

Zebralight SC600 MK3 XHP-35 Cool White

작성일: 2016.06.11

-----------------------------------------------------

Zebralight사의 최신 모델인 SC600 MK3 입니다.





아래는 제조사 홈페이지에 있는 사양입니다.


- LED: Cree XHP35 Cool White (Nominal CCT 5700K)

- User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. 

  The second sub-level of the each main levels can be further programmed to different brightness levels.

- Light Output (runtimes) 

  High:        H1  1300 Lm (PID, approx 2.2 hrs)   or  H2 670 Lm (PID, 2.8 hrs)/360 Lm (4.3 hrs)/160 Lm (12 hrs)

  Medium:  M1  70 Lm (33 hrs)   or   M2 32 Lm (73 hrs)/12 Lm (8 days)

  Low:         L1  3.8 Lm (18 days)  or  L2 0.43 Lm (2.8 months)/0.06 Lm (5.1 months)/0.01 Lm (7.1 months)

  Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1

- Operating Voltage Range: 2.7V - 6.0V

- Battery: One 18650 size (i.e. unprotected, 65.0-65.2 mm long) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.

- Parasitic Drain: Negligible (much less than the self discharging of a battery)

- Beam Type

  80 degree spill

  10 degree hot spot

- Dimensions

  Head Diameter: 1.2 inch (30 mm)

  Body Diameter: 0.98 inch (25 mm)

  Length: 3.8 inch (96 mm)

- Weight

  2.35 oz (66 gram) without battery

- Features

  PID thermal regulated outputs (two highest output levels)

  Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff

  Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)

  Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low

  Durable electronic soft-touch switch

  Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.

  Precision machined unibody casing from premium grade  aluminum bar stocks

  Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing

  Durable natural hard anodized finish (Type III Class I)

  Sealed and potted LED driver circuitry

  Tempered optical grade glass

  Orange peel textured reflector

  Battery reverse polarity protection

  Pocket clip

  Lanyard ring

  Waterproof to IPX7 (2 meters, 30 minutes)

- Operations

  This light has 3 main levels (High, Medium, and Low) and a beacon-strobe mode. Each main level can be programmed to one of its 

  two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.


- Basic Operation

  One short-click turns on the light to High or turns off the light.

  Two short-click turns on the light to Medium.

  Three short-click turns on the light to the beacon-strobe mode.

  Press and hold (for over 0.6 seconds) turns on the light to Low and then Medium and High. Release at the desired level.

- Advanced Operation and Configuration

  Press and hold to cycle from Low, Medium and High, release at the desired level to set. When press and hold, the light always cycle 

  from Low to High regardless which level you are currently in.

  Double click to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorized 

  after the light is turned off and through battery changes.

  The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, 

  double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. 

  Short click to turn off the light when finishing configurations. The selections for the second sub-levels are memorized after the light is 

  turned off and through battery changes.

  This light uses the main LED (flashing 1 to 4 times) to indicate the estimated remaining capacity of the battery. 

  To start the battery indicator, (from Off) short-click 4 times without pause.

  Beacon-strobe mode can be accessed from 3 short-clicks when the light is Off. Once in the beacon-strobe mode, you can double-click to 

  cycle through different types of beacons and strobes. Beacon-strobe settings are memorized when the light is turned off and through 

  battery changes.


구성품은 기존에 다른 제브라라이트와 동일합니다.

본체, 오링, 클립 그리고 몸체에 부착된 랜야드링



클립은 양방향 모두 사용가능합니다.


SC600 MK2에 비해서는 조금 밝아진 색상입니다.



길이도 짧아졌구요.

SC600 MK2 길이 101.6mm

SC600 MK3 길이 96mm 


헤드에도 널링을 넣어서 발열에 효과적이도록 설계되었습니다.




랜야드을 연결할 수 있도록 해주는 링입니다.


꼬리세움이 가능하도록 테일캡은 편평합니다.


버튼


AR코팅도 확실합니다.


LED는 Cree사의 XHP35 입니다.


기본 분리는 테일캡만 가능합니다.



스프링에서 Pogo-pin이라는 방식으로 변경되어 라이트 길이가 많이 줄었습니다.

다만, 덕분에 배터리는 비보호만 사용해야됩니다...


헤드쪽도 마찬가지로 pogo pin입니다.



크기 비교

좌측부터 SC600 MK2, SC600 MK3, SC62d, 비호보 18650 배터리

스펙상 SC62d의 길이가 96.5mm 입니다. SC62d도 18650 라이트치고는 상당히 작은 크기였는데, SC600 MK3는 더 짧아졌습니다.

참고로 SC62의 후속인 SC63의 경우 길이가 92.5mm 입니다.


실내빔샷 (거리 약 50cm, ISO 100, 태양광, 1/250s)

1300lm


670m


360lm


160lm


60lm


실외빔샷 (거리 약 5m, ISO 100, 태양광, 1s)

1300lm


670lm


360lm


160lm


70lm


1300lm 원거리 빔샷


SC600 MK3가 나오면서 기존과 달라진 주요사항은 바로 입력전압이 6v까지로 올라갔다는 점입니다.

기존에 제브라라이트의 18650 배터리를 사용하는 라이트는 여지없이 입력전압이 4.2v까지였습니다. (4.35v 배터리도 그냥 사용해도 문제는

없었던 것으로 알고 있습니다.) 처음 제조사에서 스펙을 공개했을 때 드디어 제브라라이트에도 CR123 배터리 2개를 사용할 수 있겠구나라는

생각을 했습니다. 사실 CR123을 사용하지 않아도 18650배터리만으로도 충분히 제 성능을 내주었기 때문에 큰 차이는 없지만

배터리 충전이 불가능한 경우 CR123은 유용하게 사용할 수 있다는 점에서 다른 제조사들도 왠만하면 18650라이트는 CR123 2개까지는 

사용할 수 있도록 스펙을 표기했었습니다.


그런데 SC600 MK3는 길이를 기존보다 줄이면서 배터리를 비보호만 사용할 수 밖에 없도록 되었습니다.

덕분에 아래처럼 몇mm 차이가 나지 않는 배터리임에도 +극에 흠집이 생길정도로 배터리 길이에 대한 제약이 크더군요. (사진 우측 배터리)


DLG 18650 배터리를 넣었을 때


파나소닉 18650 배터리를 넣었을 때


둘의 길이 차이는 약 1mm 내외입니다. 

즉, 비보호 배터리에서 1~2mm만 길어져도 내부 pogo pin에 상당한 힘이 가해진다는 점인데요. 제조사에서 명기하고 있지만

SC600 MK3와 SC63은 비보호 배터리만 사용가능합니다. 보호 18650은 당연히 안되구요.

혹시나 해서 CR123 배터리 2개를 넣어봤으나, 이 경우 배터리가 몸체 밖으로 약간 나와서 테일캡을 조일 수도 없더군요.



결과적으로 스펙상의 허용인력전압이 6v까지 높아졌지만, CR123 배터리는 사용할 수 없습니다.

길이를 줄이는 것은 좋았으나 지나치게 줄이면서 배터리 범용성 측면에서는 오히려 기존 모델보다 후퇴했다는 생각이 들더군요.


XM-L2에서 XHP35로 업그레이드되면서 최고 광속도 1126lm에서 1300lm으로 올라갔지만, 배터리 범용성은 오히려 떨어지면서

실용성 측면에서 본다면 SC600 MK2를 구입하는 게 더 좋지 않을까 싶습니다. 수치상으로는 광속차이가 커보이지만 막상 써보면

눈에 보이기에 큰 차이가 나는 것은 아니니까요.


어쨌거나 SC600Fd MK3 Plus (XHP50 93~95 CRI LED 적용)는 제발 길이 좀 늘려서 배터리를 다양하게 사용할 수 있었으면 합니다.

(현재(2016.06.11) 공개된 스펙으로는 SC600 MK3와 길이는 동일하네요.)


추가(2017.11.11)

CPF의 Maukka라는 유저가 최신 모델인 Olight M2R과 SC600 MK3 XHP35 HI 등과 함께 런타임 측정한 자료가 있어서 추가합니다.

(리뷰링크 및 사진출처: http://www.candlepowerforums.com/vb/showthread.php?439622-Olight-M2R-NW-CW-review-with-measurements-(18650-XHP35-USB-charging)&highlight=)


LED가 XHP35 HI라서 XHP35와 정확하게 비교하기 힘들고 색온도 자체도 뉴트럴화이트이지만, 참고용으로만 보시면 될 것 같습니다.


Zebralight SC600w MK3 HI의 경우 편평한 그래프로써 600루멘 2시간 런타임을 보여주다가, 광량 저하 후 2시간 30분까지 구동되네요. 

제조사 스펙은 580루멘으로 2.8시간이니 얼추 비슷한 것 같습니다.




'Flashlight > Review' 카테고리의 다른 글

Foursevens Maelstrom MMX-360 XM-L2  (0) 2016.10.17
Manker U11 Cool White XP-L HD review  (0) 2016.10.10
Zebralight SC32 CW XM-L2 review  (0) 2016.08.08
Sunwayman S10A XM-L2 review  (0) 2016.08.01
Icon Rogue 1 XR-E review  (0) 2016.07.25