본문 바로가기

Flashlight/Review

Zebralight H600Fw Mk2 Neutral White Headlamp

작성일: 2017.11.27
-----------------------------------------------------------

제브라라이트 헤드랜턴 시리즈 중 하나인 H600Fw MK2입니다.

F는 Floody Beamshot을 위해서 Frosted Lens가 적용된 제품이며, w는 Warm Tint를 뜻합니다.

Frosted Lens라서 동일한 사양인 H600w에 비해서 루멘값은 약간 낮은 편입니다.


우선 제조사 사양입니다.


LED: Cree XM-L2 Neutral White (Nominal CCT 4400K)
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High:         H1 970 Lm (PID, approx 2 hr)   or    H2  590 Lm (PID, approx 2.5 hrs) / 313 Lm (3.9 hrs) / 142 Lm (11 hrs)
Medium:    M1 61 Lm (30 hrs)    or    M2   28 Lm (66 hrs) / 10 Lm (172 hrs)
Low:         L1   3.3 Lm (16 days)   or    L2   0.4 Lm (2.5 months) / 0.06 Lm (4.6 months) / 0.01 Lm (5.5 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
 
Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using ZL634 batteries. Runtimes of the two PID controlled levels (1020Lm and 620Lm) vary greatly with ambient temperature and air circulation.

Operating Voltage Range: 2.7V - 4.2V

Battery: One 18650 size (up to 69mm) 3.6/3.7V li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
 Floody beam from frosted lens, with 90 degree beam spread
Dimensions
 Head Diameter: 0.95 inch (24.2 mm)
 Length:    3.85 inch (97.8 mm)
Weight
 1.4 oz (39 gram)
 3.0 oz (84.6 gram) with ZL634 battery
 4.4 oz (124.6 gram) with ZL634 battery and headband
Features
 PID thermal regulated outputs (970Lm and 590Lm)
 Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
 Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
 Builtin over-discharging protection (2.7V cutoff)
 Durable electronic soft-touch switch
 Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
 Precision machined unibody casing from premium grade  aluminum bar stocks
 Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
 Durable natural hard anodized finish (Type III Class I)
 Sealed and potted LED driver circuitry
 Battery reverse polarity protection
 Tempered optical grade glass  
 Waterproof to IPX7 (2 meters, 30 minutes)


Operations(UI)

This light has 3 main levels (High, Medium, and Low) and a beacon-strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.


Basic Operation
 One short-click turns on the light to High or turns off the light.
 Two short-click turns on the light to Medium.
 Three short-click turns on the light to the beacon-strobe mode.
 Press and hold (for over 0.6 seconds) turns on the light to Low and then Medium and High. Release at the desired level.


Advanced Operation and Configuration
 Press and hold to cycle from Low, Medium and High, release at the desired level to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
 Double click to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorized after the light is turned off and through battery changes.
 The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. Short click to turn off the light when finishing configurations. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.
 This light uses the main LED (flashing 1 to 4 times) to indicate the estimated remaining capacity of the battery. To start the battery indicator, (from Off) short-click 4 times without pause.
 Beacon-strobe mode can be accessed from 3 short-clicks when the light is Off. Once in the beacon-strobe mode, you can double-click to cycle through different types of beacons and strobes. Beacon-strobe settings are memorized when the light is turned off and through battery changes.
 
Accessories in the package

 Two o-rings
 Headband with removable top strap, and a black silicone holder


포장은 언제나 그렇듯이 갈색 종이박스입니다.


구성품들


쥐색 아노다이징입니다.





CE인증마크


테일캡


헤드에 위치한 전자식 스위치


Frosted Lens라서 전면에서 볼 때 LED나 반사경이 보이지 않는 형태입니다.


AR코팅은 안되어 있습니다.



테일캡 널링


기본 2단 분리


스프링이 장착된 테일캡


잘 가공된 나사선이며, 아노다이징까지 되어 있어서 테일캡을 약간 풀어두면 전류가 통하지 않습니다.


헤드쪽에도 스프링이 부착되어 있구요.


무게는 아주 가벼운 편이며, 손에 쏙 들어오는 크기입니다.




참고 빔샷

실내(거리 약 50cm 방문)

H1


H2 (590lm)


M1


M2 (28lm)


L1


실외빔샷 (거리 약 5m)

H1


H2 (590lm)


M1


M2 (28lm) 플러드한 빔샷 때문인지 빔샷이 찍히지 않네요.


빔샷은 아미텍 위자드와 비슷한 형태입니다.

위자드의 경우 TIR옵틱을 적용해서 중심광과 주변광이 구분되지 않고 전체적으로 고르게 빛이 퍼지는 형태인데, H600Fw도 그와

비슷합니다. 다만, H600Fw는 H600w에 Frosted Lens만 적용한 것이라서 중심광이 고르게 퍼지는 데에는 한계가 있어서 TIR렌즈를 적용한

위자드처럼 완전히 고른 빔샷은 아닙니다.

물론 덕분에 다소의 중심광이 있어서 보다 멀리 비춰주는 점은 있습니다.