본문 바로가기

Flashlight/Review

Oveready TorchLab H3N V4 Triple Nichia219 Hi Cri with Custom 18650 body & tailcap

작성일: 2018.03.18

-----------------------------------------

슈어파이어 Lego입니다.

헤드는 슈어파이어 오리지날 Z44헤드

몸체와 테일캡은 커스텀제품이고, 이베이에서 판매하는 물건입니다.

은색으로 빛나는 이유는 아노다이징이 처리되지 않아서 그렇습니다.

P60 module은 Oveready TorchLab H3N V4 Triple Nichia219 Hi Cri 입니다.




큼직한 마름모 널링


테일캡도 동일합니다.


테일캡 간격이 상당히 있습니다.

아노다이징 처리가 되지 않아서, 테일캡을 살짝만 조여도 내부 스프링이 배터리 -극쪽에 접촉되서 점등되기 때문에 일정 수준만 

조이면 됩니다. 더 조일 수는 있으나, 그럴 경우 스프링에 힘이 많이 걸리기 때문입니다.


고무캡이 밖으로 돌출되지 않는 형태로 스위치는 Shrouded 형태입니다.


손목끈을 연결할 수 있는 구멍이 2개 있습니다.

다만, 살짝 가공이 아쉬운 부분이 있네요. 


테일캡을 옆에서 바라본 모습


그래서 꼬리세움도 잘 됩니다.




기본 분리


테일캡 나사선과 오링

나사선은 잘 가공되어 있네요.


헤드쪽도 양호하구요.


테일캡에 장착된 스위치는 McClicky입니다.

커스텀라이트에 주로 사용됩니다.

사진에 보이는 황동어댑터는 6P, C2등의 슈어파이어 테일캡에 McClicky 스위치를 장착하기 위한 부품입니다.

원래는 E시리즈 테일캡에 장착하도록 출시된 스위치라서 다른 종류에 장착하려면 어댑터가 필요합니다.


P60 모듈 삽입부


바디는 18650 배터리가 들어가도록 내경이 가공되어 있고, 18650 배터리가 헤드쪽으로 빠지지 않도록 턱이 조금 남겨져 있습니다.


사진 확대


18650 배터리는 헤드쪽으로 나오지 않습니다.


TorchLab P60 모듈입니다.


상당히 잘 만들어진 모듈입니다.

물론 그만큼 가격도 비싸긴 합니다.



흰색띠에 새겨진 모듈 정보

H3N (LED당 1.5A total 4.5A 전류가 흐르는 고광량이라서 "H"가 붙고, Neutral white라서 "N"입니다. 3은 아마도 모드가 3개라서 붙은 것 같구요)

LMH (Low-Med-High), HML (High-Med-Low) 버전도 있습니다. 밝기는 수준은 1%-30%-100% 입니다. 메모리 기능은 없으며, 항상

Low 밝기로 켜집니다.


아래는 CPF에서 가져온 정보입니다. (출처: 링크클릭)


Fully Boosted Thermal and Voltage Regulated V4 Triples cranking out up to 1400 lumens
Custom built engines for your favorite hosts
Available with Cree XPE/XPG and Nichia 219 Hi CRI


New V4 Triple: Smart voltage based cell counter, cell monitoring, voltage monitoring (extending IMR cell life), and a 2 step thermal management and output reduction system. These features bring additional security and reliability to our existing L3 model, but they also allow us to push the envelope. Thermal Management means we can push more heat, more amps, and more lumens. 


All models come with electronic reverse polarity protection, critical overheating cut-off (full off at 120°C) and low voltage cutoff at 2.2V.

Lithium Battery Monitor
Battery monitoring function is a new feature of V4 Triple LED drop-ins. It implements a fully-automatic lithium battery protection function with cell count detection. It's set to 3.6-3.7 nominal voltage and admits single (1S, 3.7V) or two-in-series (2S, 7.4V) battery configurations.

Battery Stretch Function
This feature is a new feature of V4 Triple LED drop-ins, and nearly doubles the runtime when the full mode is initially used. The output is reduced to 10% at 10% of the cell. So it lets the remaining 10% of battery to last 10 times longer. It's still possible to return to full mode when required by the situation

Thermal Management
In addition to the hardware overheating cutoff (at 120°C) the V4 Triple LED drop-ins implement a 65C (149F) temperature setting at which the output is reduced to prevent lithium battery overheating (when it shares the same housing with the light engines). High-temperature warning is introduced in the stand-by mode (fast red-indicator blinking during which it's not recommended to touch the flashlight head).


  • Fully regulated output between 4.8 and 9.5 volts
  • Below 4.8v it drops out of regulation and continues running until about 3v
  • The output is reduced to 10% when 10% of the cell(s) capacity remains
  • Up to 96% efficient driver with 2 lithium ion cells
  • Integrated thermal overheating protection at 120C (248F)
  • Thermal Management reduces output to 10% at 65C (149F)
  • Shock and vibration tolerant materials and components
  • Heavy duty positive contact spring
  • Solid brass negative contact ring
  • Tight fit for best thermal contact with your host
  • Shock proof materials, components, and design
  • Suitable for use in weapon mounted lights
  • Hard anodized black finish for superior thermal emissivity and durability
  • 24 gauge mil-spec wire with 19 strand, silver-plated copper conductors, teflon insulated
  • Multiple independent LEDs for more output than single LED designs with similar wattage




Warnings:

  • This light creates excessive heat
  • This light may cause eye damage
  • This light may burn the skin at close range.
  • This light may cause combustibles to ignite
  • This light is not a toy, keep away from children


LED는 Nichia219B로 추측됩니다.


입력전압은 9.5v까지라서 16340/18350/18650 2개로도 구동가능합니다.



Oveready 제품의 특징으로 새겨지는 동그라미 문양


LED기판은 러시아의 LUX-RC 제품입니다.

아래에서 살짝 보이는 "LUX"


반대편에서 보면 "RC"가 있구요.


색온도가 4500K 정도인 LED라서 노란색이 더 잘 드러납니다.


6P와 비교

길이 자체는 비슷합니다만, 커스텀 제품의 테일캡이 고무캡 주위로 막이 있는 형태이고, 완전히 조이지 않아도 점등이 되서 약간 덜 잠긴

상태라서 길어보입니다.


우선 널링입니다.


6P 널링보다 약간 더 긴 마름모형태이며, 널링의 깊이가 깊어서 마찰력이 더 큽니다.


테일캡






이 제품은 고무캡이 Soft type이라서 그런지 상당히 민감하게 라이트가 켜집니다.

살짝 손만 대더라도 점등이 되네요.


빔샷입니다.

먼저 AW IMR 16340 배터리 2개를 사용한 사진


실내 Low 1%


Med 30%


High 100%


실외사진

Low 1%


Med 30%


High 100%


다음은 18650 배터리로 점등한 사진입니다.


실내사진

Low 1%


Med 30%


High 100%


실외사진

Low 1%


Med 30%


High 100%


아래는 TorchLab V4 모듈에 대한 사양표입니다. (출처: http://flashlightguide.com/)

OVEREADY TorchLab Triple – Manufacturer’s Specifications

The TorchLab Triple provides fully regulated output between 4.8 and 9.5 volts and is optimized for use with two lithium-ion batteries.  Below 4.8 volts it drops out of regulation and continues running until battery voltage drops to 3.0 volts per cell.  When powered by a single lithium-ion cell, the rated output is approximately 75% of the two-cell output.

Cell count detection allows the Triple to recognize whether it is powered by one or two lithium-ion batteries and adjust the cut-off points accordingly.  When battery voltage (under load) drops to 3.4 volts per cell, output is automatically reduced to warn of the battery (or batteries) becoming depleted.  A separate battery protection circuit activates when the battery voltage falls to 3.0 volts per cell, shutting the light off.

Note: Output levels are measured at the LED.  Due to optical losses, actual “out the front” lumens will be lower.

Some stock tailcap switches, such as the SureFire Z59 click switch, may not be able to handle the current requirements of the TorchLab Triple.  Recommended switches include the SureFire Z41 (stock or modified with McClicky Switch) or a TorchLab Zero Resistance switch.


Nichia219는 18650인 경우 825루멘, 16340/18350/18650 2개인 경우 1100루멘 정도네요.


아래는 http://flashlightguide.com/ 에서 리뷰한 런타임 그래프입니다.